? 2007 california micro devices corp. all rights reserved. 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com 1 issue a ? 12/10/07 cm1409 lcd and camera emi filter array with esd protection features ? six or eight channels of emi filtering with inte- grated esd protection ? pi-style emi filters in a capacitor-resistor-capacitor (c-r-c) network ? 15kv esd protection on each channel (iec 61000-4-2 level 4, contact discharge) ? 30kv esd protection on each channel (hbm) ? greater than -35db attenuation (typical) at 1 ghz ? tdfn package with 0.50mm lead pitch: ? 6-ch. = 12-lead tdfn ? 8-ch. = 16-lead tdfn ? tiny tdfn package size: ? 12-lead: 3.0mm x 1.35mm ? 16-lead: 4.0mm x 1.60mm ? increased robustness against vertical impacts during manufacturing process ? lead-free finishing applications ? lcd and camera data lines in mobile handsets ? i/o port protection for mobile handsets, notebook computers, pdas etc. ? emi filtering for data ports in cell phones, pdas or notebook computers. ? wireless handsets ? handheld pcs/pdas ? lcd and camera modules product description the cm1409 is a family of pi-style emi filter arrays with esd protection, which integrates either six or eight fil- ters (c-r-c) in a small form factor, tdfn 0.50mm pitch package. the cm1409 has component values of 15pf- 100 -15pf per channel. the cm1409 has a cut-off fre- quency of 110mhz and can be used in applications with data rates up to 44mbps. the parts include esd diodes on every pin, which provide a very high level of protection for sensitive electronic components against electrostatic discharge (esd). the esd protected diodes safely dissipate esd strikes of 15kv, which even exceeds the maximum requirement of the iec61000-4-2 international standard. using the mil- std-883 (method 3015) specification for human body model (hbm) esd, the pins are protected for contact discharges at greater than 30kv. these devices are particularly well-suited for portable electronics (e.g. wireless handsets, pdas, notebook computers) because of their small package and easy- to-use pin assignments. in particular, the cm1409 is ideal for emi filtering and protecting data and control lines for the i/o data ports, lcd display and camera interface in mobile handsets. the cm1409 is housed in space-saving, low-profile 12- and 16-lead tdfn packages with a 0.50mm pitch, lead-free finishing. 100 15pf 15pf filter+esdn* gnd filter+esdn* electrical schematic 1 of 6 or 8 emi/rfi + esd channels * see package/pinout diagram for expanded pin information. r cc
? 2007 california micro devices corp. all rights reserved. 2 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com issue a ? 12/10/07 cm1409 ordering information note 1: parts are shipped in tape & reel form unless otherwise specified. pin descriptions device pin(s) name description device pin(s) name description -06 -08 -06 -08 1 1 filter1 filter + esd channel 1 12 16 filter1 filter + esd channel 1 2 2 filter2 filter + esd channel 2 11 15 filter2 filter + esd channel 2 3 3 filter3 filter + esd channel 3 10 14 filter3 filter + esd channel 3 4 4 filter4 filter + esd channel 4 9 13 filter4 filter + esd channel 4 5 5 filter5 filter + esd channel 5 8 12 filter5 filter + esd channel 5 6 6 filter6 filter + esd channel 6 7 11 filter6 filter + esd channel 6 7 filter7 filter + esd channel 7 10 filter7 filter + esd channel 7 8 filter8 filter + esd channel 8 9 filter8 filter + esd channel 8 gnd pad gnd device ground package / pinout diagrams note: CM1409-06DE 12-lead tdfn package 1) these drawings are not to scale. cm1409-08de 16-lead tdfn package n09e gnd 4 3 2 1 4 3 2 1 8 9 10 11 pa d 9 10 11 12 8 5 5 12 6 7 7 6 4 3 2 15678 n098e gnd 4 3 2 1 12 13 14 15 pa d 13 14 15 16 12 5 16 11 11 67 10 9 8 10 9 bottom view (pins up view) top view (pins down view) bottom view (pins up view) top view (pins down view) pin 1 marking pin 1 marking part numbering information pins package lead-free finish ordering part number 1 part marking 12 tdfn-12 CM1409-06DE n09e 16 tdfn-16 cm1409-08de n098e
? 2007 california micro devices corp. all rights reserved. 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com 3 issue a ? 12/10/07 cm1409 specifications note 1: t a =25 c unless otherwise specified. note 2: esd applied to input and output pins with respect to gnd, one at a time. note 3: these parameters are guaranteed by design and characterization. note 4: attenuation / rf curves characteri zed by a network analyzer using microprobes. note 5: these parameters are not guaranteed by design, characterization and production. absolute maximum ratings parameter rating units storage temperature range -65 to +150 c dc power per resistor 100 mw dc package power rating 500 mw standard operating conditions parameter rating units operating temperature range -40 to +85 c electrical operat ing characteristics (see note1) symbol parameter conditions min typ max units r resistance 80 100 120 c total total channel capacitance at 2.5vdc reverse bias, 1mhz, 30mvac 24 30 36 pf c capacitance c 1 at 2.5vdc reverse bias, 1mhz, 30mvac 15 pf v diode standoff voltage i diode =10 a6.0v i leak diode leakage current (reverse bias) v diode = + 3.3v 0.1 1.0 a v sig signal clamp voltage positive clamp negative clamp i load = 10ma i load = -10ma 5.6 -1.5 6.8 -0.8 9.0 -0.4 v v v esd in-system esd withstand voltage a) human body model, mil-std-883, method 3015 b) contact discharge per iec 61000-4- 2 level 4 notes 2 and 3 30 15 kv kv r dyn dynamic resistance positive negative 2.3 0.9 f c cut-off frequency z source =50 , z load =50 channel r = 100 , channel c = 15pf 110 mhz a 1ghz absolute attenuation @ 1ghz from 0db level z source = 50 , z load = 50 , dc bias = 0v; notes 1, 4 and 5 35 db a 800mhz - 6ghz absolute attenuation @ 800mhz to 6ghz from 0db level z source = 50 , z load = 50 , dc bias = 0v; notes 1, 4 and 5 30 db
? 2007 california micro devices corp. all rights reserved. 4 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com issue a ? 12/10/07 cm1409 performance information typical filter performance (t a =25c, dc bias=0v, 50 ohm environment) figure 1. insertion loss vs. frequency (filter1 input to gnd) figure 2. insertion loss vs. frequency (filter2 input to gnd) 0 db -10 db -20 db -30 db -40 db -50 db 3 10 100 1000 2000 6000 frequency (mhz) insertion loss 0 db -10 db -20 db -30 db -40 db -50 db 310 100 1000 2000 6000 frequency (mhz) insertion loss
? 2007 california micro devices corp. all rights reserved. 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com 5 issue a ? 12/10/07 cm1409 performance information (cont?d) typical filter performance (t a =25c, dc bias=0v, 50 ohm environment) figure 3. insertion loss vs. frequency (filter3 input to gnd) figure 4. insertion loss vs. frequency (filter4 input to gnd) 0 db -10 db -20 db -30 db -40 db -50 db 3 10 100 1000 2000 6000 frequency (mhz) insertion loss 0 db -10 db -20 db -30 db -40 db -50 db 3 10 100 1000 2000 6000 frequency (mhz) insertion loss
? 2007 california micro devices corp. all rights reserved. 6 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com issue a ? 12/10/07 cm1409 performance information (cont?d) typical diode capacitance vs. input voltage figure 5. filter capacitance vs. input voltage (normalized to capacitance at 2.5vdc and 25c) capacitance (normalized) dc voltage cirtek pod-cec-dfn12-015 3.00x1.35mm, 0.5mm pitch 12l tdfn
? 2007 california micro devices corp. all rights reserved. 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com 7 issue a ? 12/10/07 cm1409 mechanical details tdfn-12 mechanical specifications the CM1409-06DE is supplied in a 12-lead, 0.5mm pitch tdfn package. dimensions are presented below. ? this package is compliant with jedec standard mo-229c with the exception of the "d", "d2", "e", "e2", "k" and "l" dimensions as called out in the table above. dimensions for 12-lead, 0.5mm pitch tdfn package package dimensions package tdfn jedec no. mo-229c ? leads 12 dim. millimeters inches min nom max min nom max a 0.70 0.75 0.80 0.028 0.030 0.031 a3 0.20 ref 0.008 ref b 0.20 0.25 0.30 0.008 0.010 0.012 d 2.90 3.00 3.10 0.114 0.118 0.122 d2 2.40 2.50 2.60 0.095 0.098 0.102 e 1.25 1.35 1.45 0.049 0.053 0.057 e2 0.35 0.40 0.45 0.014 0.016 0.018 e 0.50 bsc 0.020 bsc k 0.20 0.008 l 0.20 0.25 0.30 0.008 0.010 0.012 # per tape and reel 3000 pieces controlling dimension: millimeters mechanical package diagrams bottom view b l 0.10 c a b m 8x d2 e2 e gnd pad k 10 11 12 2 134 9 pin 1 c0.2 56 87 locator top view d e pin 1 marking 4 3 2 1 9 11 12 5 8 6 10 7 a a3 0.10 c side view
? 2007 california micro devices corp. all rights reserved. 8 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com issue a ? 12/10/07 cm1409 tape and reel specifications part n um be r package size (mm) pocket size (mm) b 0 x a 0 x k 0 tape width w reel diameter qty per reel p 0 p 1 CM1409-06DE 3.00 x 1.35 x 0.75 3.30 x 1.65 x 1.05 8mm 178mm (7") 3000 4mm 4mm to p for tape feeder reference cover tape p 1 only including draft. concentric around b. k o embossment user direction of feed 0.2 mm p o center lines of cavity w 10 pitches cumulative tolerance on tape a o b o
? 2007 california micro devices corp. all rights reserved. 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com 9 issue a ? 12/10/07 cm1409 mechanical details (cont?d) tdfn-16 mechanical specifications the cm1409-08de is supplied in a 16-lead, 0.5mm pitch tdfn package. dimensions are presented below. ? this package is compliant with jedec standard mo-229c with the exception of the "d", "d2", "e", "e2", "k" and "l" dimensions as called out in the table above. dimensions for 16-lead, 0.5mm pitch tdfn package package dimensions package tdfn jedec no. mo-229c ? leads 16 dim. millimeters inches min nom max min nom max a 0.70 0.75 0.80 0.028 0.030 0.031 a3 0.20 ref 0.008 ref b 0.20 0.25 0.30 0.008 0.010 0.012 d 3.90 4.00 4.10 0.153 0.157 0.161 d2 3.10 3.20 3.30 0.122 0.126 0.130 e 1.50 1.60 1.70 0.059 0.063 0.067 e2 0.30 0.40 0.50 0.012 0.016 0.020 e 0.50 bsc 0.020 bsc k 0.20 0.008 l 0.20 0.30 0.40 0.008 0.010 0.012 m 0.25 ref 0.010 ref # per tape and reel 3000 pieces controlling dimension: millimeters mechanical package diagrams bottom view a a3 0.10 c side view b l d2 e2 e gnd pad k 13 14 15 16 3 2 145 12 pin 1 c0.2 678 11 10 locator top view d e pin 1 marking 4 3 2 1 13 15 16 5 12 8 7 6 14 9 11 10 9 m cirtek pod-cec-dfn16-013 4.00x1.60mm, 0.5mm pitch 16l tdfn
? 2007 california micro devices corp. all rights reserved. 10 490 n. mccarthy blvd., milpitas, ca 95035-5112 tel: 408.263.3214 fax: 408.263.7846 www.cmd.com issue a ? 12/10/07 cm1409 tape and reel specifications part n um be r package size (mm) pocket size (mm) b 0 x a 0 x k 0 tape width w reel diameter qty per reel p 0 p 1 cm1409-08de 4.00 x 1.60 x 0.75 4.30 x 1.90 x 1.20 12mm 178mm (7") 3000 4mm 4mm to p for tape feeder reference cover tape p 1 only including draft. concentric around b. k o embossment user direction of feed 0.2 mm p o center lines of cavity w 10 pitches cumulative tolerance on tape a o b o
|
